Hi,so it looks that tuner is found.
AlexELEC:~ # dmesg | grep DVB
[ 15.985347@1] DVB: aml_dvb_probe: probe amlogic dvb driver
[ 15.985375@1] DVB: aml_dvb_probe: dmx rst ctl = ffffffc0238b46c0
[ 15.985383@1] DVB: aml_dvb_probe: asyncfifo rst ctl = ffffffc0238b4480
[ 15.985389@1] DVB: aml_dvb_probe: ahbarb0 rst ctl = ffffffc0238b4ac0
[ 15.985397@1] DVB: aml_dvb_probe: uparsertop rst ctl = ffffffc0238b4f00
[ 15.985471@1] DVB: registering new adapter (amlogic-dvb)
[ 15.985475@1] DVB: aml_dvb_probe: Registered adpter: amlogic-dvb
[ 15.995042@0] DVB FE: Init AVL6862/M88RS6060 frontend 0
[ 17.220192@0] i2c i2c-2: Load avl6862 firmware patch for DVB-T/T2 size=70044
[ 17.809533@0] DVB FE: AVL6762 and MxL608 attached!
[ 17.809544@0] amlogic-dvb dvb.50: DVB: registering adapter 0 frontend 0 (Availink avl6762)...
[ 17.809882@0] DVB FE: Frontend AVL6862/M88RS6060 registred!
Now my problem is, that it cannot find any dvb-t2 programs. Tvheadend shows at scanning some signal jumping (even over 90%) but than drops to 30% and skip to next channel search.I tried all drivers which I can select in Kodi, and even CoreElec. At coreelec (gxl_p231_1g_m8s_dvb.dtb withou dvbt because there is none) tvheadend 4.2 and at alexelec (gxl_p231_1g_m8s_dvbt.dtb) the one from linuxserver.io 4.3. Overall is the same behaviour.I am using this versions, alexElec 3.3.9 and coreElec 9.2.8.I tried some newer versions, but it hangs cycled at some SIP searching...? Why is not possible to use newer versions?Do you have any idea how to get scanned channels?Thanksstandal
PS: Now I looked also on the tuner chips and they are AVL6762 and MXL608. which does not corespond with "DVB FE: Frontend AVL6862/M88RS6060 registred!". Any idea?