Форум проекта Alex@ELEC
Релизы Alex@ELEC => Amlogic => Тема начата: Alex от 02 Июля 2023, 13:11:24
-
Системы для Amlogic S905(X/W/D) и S912 (Kodi-18.9). (https://github.com/AlexELEC/AE-AML/releases/tag/3.3.8)
Основные изменение в этой версии для «KODI» — такие же как для PC-версии (https://alexelec.tv/alexelec-pc-11-2-0-x86_64-gbm-drm-prime/).
-
Hi Alex,
Hope all's well. See some rapid updates, just as I tried updating to 3.3.7 ! 🐱
1. For stream auto switch setting, the screenshot is in Ukrainian?
Can you give me the Kodi Settings menu path in English?
2. FYI: just as happened with 3.3.5, 3.3.7 distro doesn't seem to accept backup restore via the AE Settings menu. I need to use the manual (root folder)# tar xpf file/path/backup.tar method:
https://discourse.coreelec.org/t/bacup-and-restore-comand-on-terminal/1493 (https://discourse.coreelec.org/t/bacup-and-restore-comand-on-terminal/1493)
-
Hi,
I`m fine. Thanks.
Can you give me the Kodi Settings menu path in English?
(https://i.ibb.co/B6j03nN/screenshot000.png)
2. FYI: just as happened with 3.3.5, 3.3.7 distro doesn't seem to accept backup restore via the AE Settings menu.
I don`t use this option. And I have never tried this.
-
Ok Alex !
Re: the new stream switching ffmpeg option.
Can it help to solve the ffmpeg processing delays problem of recorded YouTube channels ( with separate audio and streams) in TVLink? Or the stream switch is a different solution ?
-
Can it help to solve the ffmpeg processing delays problem of recorded YouTube channels ( with separate audio and streams) in TVLink? Or the stream switch is a different solution ?
Hi,
No. This is not related to your problem.
-
This looks exciting for ARM Linux video acceleration, which always was vendor proprietary. For a long time kernel 3.14.29 was used for older SoCs since Amlogic proprietary blobs were not available in newer kernels:
https://www.cnx-software.com/2023/07/21/arm-panfrost-is-now-the-gpu-driver-for-the-linux-community/
So you think this can help with AlexElec/ Coreelec newer kernels support for older SoCs like S905W ?
-
So you think this can help with AlexElec/ Coreelec newer kernels support for older SoCs like S905W ?
You can look here: https://forum.libreelec.tv/thread/22564-official-le-test-images-for-amlogic-kodi-20/
I am not interested in this issue.
-
привет, подскажите пожалуйста: epg не на всех каналах отображается, где в настройках, что указать?
-
привет, подскажите пожалуйста: epg не на всех каналах отображается, где в настройках, что указать?
Здравствуйте. Это зависит от того, какой PVR-клиент Вы используете.
-
tvheadend
-
tvheadend
На сервере нужно сопоставлять каналы с EPG.
-
в том то и дело, что они сопоставлены, а показывает меньше чем на половине каналов
-
в том то и дело, что они сопоставлены, а показывает меньше чем на половине каналов
Возможно в Вашем xml-файле нет программы на эти каналы. Скачайте файл и проверьте.
http://your_ip:9981/xmltv
-
так и есть, на эти каналы нет программы (провайдер НТВ+), подскажите как исправить?
-
так и есть, на эти каналы нет программы (провайдер НТВ+), подскажите как исправить?
Если это каналы со спутника, почему Вы не берете EPG там же, на спутнике (over-the-air EPG graber)? Или найдите найдите xmltv-программу где будут Ваши каналы.
-
Благодарю вас, over-the-air EPG graber решил проблему с EPG, первый раз настраиваю спутник в Tvheadend, осталось ещё два вопроса, как правильно создавать фаворитные списки и туда добавлять каналы, и есть ли поддержка HDMI-CEC все настройки облазил и не смог найти.
-
как правильно создавать фаворитные списки и туда добавлять каналы
Давно не пользовался Tvheadend, просто не помню. Посмотрите здесь https://docs.tvheadend.org/
есть ли поддержка HDMI-CEC
Есть. В настройках ввода.
https://kodi.wiki/view/Settings/System/Input
-
Доброе утро, решил на одном из тв боксов (alexelec 3.3.9) установить плагин погоды, плагин установился, запускается, но при попытке выбрать место локации выдаёт ошибку. Log kodi:
[spoiler="KODI LOG"] ERROR: GetDirectory - Error getting return
2023-08-24 01:33:12.632 T:4090531856 ERROR: CGUIMediaWindow::GetDirectory(return) failed
2023-08-24 01:33:22.520 T:4090531856 WARNING: CAddonMgr: 'script.module.certifi' required by 'weather.gismeteo' is missing. Add-on may not function correctly
2023-08-24 01:33:22.521 T:4090531856 WARNING: CAddonMgr: 'script.module.chardet' required by 'weather.gismeteo' is missing. Add-on may not function correctly
2023-08-24 01:33:22.521 T:4090531856 WARNING: CAddonMgr: 'script.module.idna' required by 'weather.gismeteo' is missing. Add-on may not function correctly
2023-08-24 01:33:28.201 T:3305108272 ERROR: EXCEPTION Thrown (PythonToCppException) : -->Python callback/script returned the following error<--
- NOTE: IGNORING THIS CAN LEAD TO MEMORY LEAKS!
Error Type: <type 'exceptions.ImportError'>
Error Contents: No module named charset_normalizer
Traceback (most recent call last):
File "/storage/.kodi/addons/weather.gismeteo/default.py", line 12, in <module>
from resources.libs import Gismeteo, GismeteoError, Location, Weather, WebClientError
File "/storage/.kodi/addons/weather.gismeteo/resources/libs/__init__.py", line 8, in <module>
from .gismeteo import GismeteoError, GismeteoClient
File "/storage/.kodi/addons/weather.gismeteo/resources/libs/gismeteo.py", line 8, in <module>
import requests
File "/storage/.kodi/addons/script.module.requests/lib/requests/__init__.py", line 45, in <module>
from .exceptions import RequestsDependencyWarning
File "/storage/.kodi/addons/script.module.requests/lib/requests/exceptions.py", line 11, in <module>
from .compat import JSONDecodeError as CompatJSONDecodeError
File "/storage/.kodi/addons/script.module.requests/lib/requests/compat.py", line 14, in <module>
import charset_normalizer as chardet
ImportError: No module named charset_normalizer
-->End of Python script error report<--
2023-08-24 01:33:42.119 T:4090531856 ERROR: Previous line repeats 2 times.
2023-08-24 01:33:42.119 T:4090531856 WARNING: CGUIWindowManager - HandleAction - ignoring action 92, because topmost modal dialog closing animation is running
2023-08-24 01:33:47.111 T:4090531856 NOTICE: Whitelist search for: width: 720, height: 576, fps: 50.000, 3D: false
2023-08-24 01:33:47.112 T:4090531856 NOTICE: Display resolution ADJUST : 1920x1080 @ 50.00 - Full Screen (29) (weight: 0.000) [/spoiler]
Я так полагаю проблема с пайтон библиотекой charset_normalizer, я её устанавливаю из entware, всё прекрасно ставится, но проблему не решает. Что ему не хватает?
-
Я так полагаю проблема с пайтон библиотекой charset_normalizer, я её устанавливаю из entware, всё прекрасно ставится, но проблему не решает. Что ему не хватает?
Доброе. Правильно полагаете, только entware здесь не причем. Вам нужно установить плагин (charset_normalizer) для Коди.
-
Одну проблему решил, вылезла другая. На некоторых каналах сыпет картинка, внешний usb тюнер (technisat skystar usb 2 hd ci) подключаю к компу с виндой, там всё отлично, на твбоксе подсыпает, с этим что-то можно сделать?
-
Одну проблему решил, вылезла другая. На некоторых каналах сыпет картинка, внешний usb тюнер (technisat skystar usb 2 hd ci) подключаю к компу с виндой, там всё отлично, на твбоксе подсыпает, с этим что-то можно сделать?
Как вариант: на USB-порту приставки не хватает питания. Подключить через активный USB-хаб.
-
Уважаемый Alex, у tehnisat skystar свой адаптер питания, но следуя вашему совету, попробовал с активным хабом, но ситуацию это не изменило :-[
-
Уважаемый Alex, у tehnisat skystar свой адаптер питания, но следуя вашему совету, попробовал с активным хабом, но ситуацию это не изменило :-[
Там все равно частично питание подается через USB. В любом случае, других вариантов у меня нет.
-
Заметил особенность, рассыпается картинка только на dvb-s2 транспордерах, нашёл тему, где есть патч для линукса https://patchwork.linuxtv.org/project/linux-media/patch/1391679907-17876-1-git-send-email-david.jedelsky@gmail.com/
Возможно такой патч для dvb-s2 на вашей системе сделать?
-
Заметил особенность, рассыпается картинка только на dvb-s2 транспордерах, нашёл тему, где есть патч для линукса https://patchwork.linuxtv.org/project/linux-media/patch/1391679907-17876-1-git-send-email-david.jedelsky@gmail.com/ (https://patchwork.linuxtv.org/project/linux-media/patch/1391679907-17876-1-git-send-email-david.jedelsky@gmail.com/)
Возможно такой патч для dvb-s2 на вашей системе сделать?
Этот патч есть в системе.
-
Hello, can you please help me out to install alexElec on my x96 mini 2/16 supposedly s905w2(i opened it and its what it says on the chip), i have tried many different device trees cant seem to find the right one! Got the STB from aliexpress, so there might be some differences, and its not actually s905w2, i am new to this sorry if my question is stupid!
-
Hello, can you please help me out to install alexElec on my x96 mini 2/16 supposedly s905w2(i opened it and its what it says on the chip), i have tried many different device trees cant seem to find the right one! Got the STB from aliexpress, so there might be some differences, and its not actually s905w2, i am new to this sorry if my question is stupid!
Hi,
If you have s905w2 then you need the CoreELEC (https://alexelec.tv/coreelec-ae-fork-20-3-nexus_ae-02/) (ae-fork) system for Amglogic NE.
https://github.com/AlexELEC/CoreELEC/releases/tag/20.3-Nexus_ae-02 (https://github.com/AlexELEC/CoreELEC/releases/tag/20.3-Nexus_ae-02)
-
Hello, can you please help me out to install alexElec on my x96 mini 2/16 supposedly s905w2(i opened it and its what it says on the chip), i have tried many different device trees cant seem to find the right one! Got the STB from aliexpress, so there might be some differences, and its not actually s905w2, i am new to this sorry if my question is stupid!
Hi,
If you have s905w2 then you need the CoreELEC (https://alexelec.tv/coreelec-ae-fork-20-3-nexus_ae-02/) (ae-fork) system for Amglogic NE.
https://github.com/AlexELEC/CoreELEC/releases/tag/20.3-Nexus_ae-02 (https://github.com/AlexELEC/CoreELEC/releases/tag/20.3-Nexus_ae-02)
and which device tree do i use?
-
and which device tree do i use?
s4_s905w2_2g
-
s4_s905w2_2g
This way with toothpick method its stuck on x96mini logo, and with just sd card inserted no toothpick it is in a reboot loop it seems!
-
This way with toothpick method its stuck on x96mini logo, and with just sd card inserted no toothpick it is in a reboot loop it seems!
This means that the device tree is not suitable. Apparently you did not correctly identify the processor.
-
This way with toothpick method its stuck on x96mini logo, and with just sd card inserted no toothpick it is in a reboot loop it seems!
This means that the device tree is not suitable. Apparently you did not correctly identify the processor.
Any way i can check it to make sure, it has android 11 on it, maybe with a program i can see what proccesor it has?
-
Any way i can check it to make sure, it has android 11 on it, maybe with a program i can see what proccesor it has?
Try this https://deviceinfohw.ru/main/index.html
-
Any way i can check it to make sure, it has android 11 on it, maybe with a program i can see what proccesor it has?
Try this https://deviceinfohw.ru/main/index.html (https://deviceinfohw.ru/main/index.html)
It says CPU ap201 cortex-A35 32 bit
-
It says CPU ap201 cortex-A35 32 bit
This is similar to Amlogic S905W2. Describe how you perform the installation.
-
It says CPU ap201 cortex-A35 32 bit
This is similar to Amlogic S905W2. Describe how you perform the installation.
I download the image you linked, i burn it on empty SD card, then get the device tree(from other images, because the one you said didnt have it in it), copy it in the root folder, and rename it to dtb.img. Then i remove the card from pc and put it in the box, i stick a toothpick in the av port of my box where the reset button is and hold it. then i put the power on and wait but nothing happens, its either stuck in x96mini logo, or it goes into reboot cycle, again nothing happens.
-
then get the device tree(from other images, because the one you said didnt have it in it)
A tree from another image does not fit. Here's the system: https://github.com/AlexELEC/CoreELEC/releases/download/20.3-Nexus_ae-02/CoreELEC-Amlogic-ne.aarch64-20.3-Nexus_ae-02-Generic.img.gz
And there is a file "s4_s905w2_2g.dtb", I don’t know why you didn’t find it.
-
then get the device tree(from other images, because the one you said didnt have it in it)
A tree from another image does not fit. Here's the system: https://github.com/AlexELEC/CoreELEC/releases/download/20.3-Nexus_ae-02/CoreELEC-Amlogic-ne.aarch64-20.3-Nexus_ae-02-Generic.img.gz (https://github.com/AlexELEC/CoreELEC/releases/download/20.3-Nexus_ae-02/CoreELEC-Amlogic-ne.aarch64-20.3-Nexus_ae-02-Generic.img.gz)
And there is a file "s4_s905w2_2g.dtb", I don't know why you didn't find it.
ok, i used the correct tree now, its just stuck on x96mini logo. i dissasembled it again and put the mobo number in google, it also confirmed its a s905w2, i tried a bunch of the other device trees, the s905y_2g one seems to do something, when i use it, it gets past the x96mini logo, but then its stuck on black screen!
-
ok, i used the correct tree now, its just stuck on x96mini logo.
I don't know why it doesn't work out for you. I have this console (x96mini S905w2 2/16) and have no problems.
-
ok, i used the correct tree now, its just stuck on x96mini logo.
I don't know why it doesn't work out for you. I have this console (x96mini S905w2 2/16) and have no problems.
Maybe it has something to do with its android version, if its rooted or something? Please explain the steps you undergo, to make it boot from sd card.
-
Please explain the steps you undergo, to make it boot from sd card.
I use "Reset Button" method. Try others: https://wiki.coreelec.org/coreelec:ceboot#booting_coreelec
-
Please explain the steps you undergo, to make it boot from sd card.
I use "Reset Button" method. Try others: https://wiki.coreelec.org/coreelec:ceboot#booting_coreelec (https://wiki.coreelec.org/coreelec:ceboot#booting_coreelec)
Cant seem to make it work, if anyone has any other ideas, otherwise i might just order another box, and trow this one in the cabinet, for indeffinately, and use it with android in future if i need it :/
-
доброго времени
установил alexelec 3.3.9 на Mecool KIII PRO , но icam в Tvheadend не хочет работать.
в статусе подлючение к шара работает, а вот в vlc картинки нет. может кто подскажет как "полечить"?
-
установил alexelec 3.3.9 на Mecool KIII PRO , но icam в Tvheadend не хочет работать.
Здравствуйте.
Меня просили добавить патч, я добавил. Проверить его (icam) работу у меня нет возможности. Работает он или нет я не знаю.
-
да понятно если все самому тестировать одной жизни не хватит, для этого и существуют пользователи, которые сообщают о проблемах. был применён патч только для Tvheadend или так же для libdvbcsa от fegol?
-
был применён патч только для Tvheadend или так же для libdvbcsa от fegol?
Насколько я помню, только для Tvheadend.
-
Hi Alex,
dumb question. Does internal dvb-t2 tuner work in alexelec? Or only external over usb? I cannot find this info anywhere.
Thanks
standal
-
Does internal dvb-t2 tuner work in alexelec? Or only external over usb?
Hi,
Internal tuners work in Mecool KII / KIII boxes and their analogues. External ones also work, for example Technisat SkyStar USB HD.
-
Hi, I have this settopbox. When I got it, the original firmware was not working, so the only solution was to put there something else. I tried software from gtmedia and it bootet and works, but without tuner. Is it possible to make your firmware working also with that tuner? Kodi from your firmware is working like a charm, but I am not sure how to setup the tuner or do not know if your firmware is even compatible with that tuner. Or do you know where to download the original firmware?
See photo
https://ibb.co/P6zcGbP (https://ibb.co/P6zcGbP)
(https://ibb.co/P6zcGbP)
-
Hi, I have this settopbox. When I got it, the original firmware was not working, so the only solution was to put there something else. I tried software from gtmedia and it bootet and works, but without tuner. Is it possible to make your firmware working also with that tuner? Kodi from your firmware is working like a charm, but I am not sure how to setup the tuner or do not know if your firmware is even compatible with that tuner. Or do you know where to download the original firmware?
Hi,
If you have a DVB-T tuner and a processor S905D, try the device-tree "gxl_p231_1g_m8s_dvbt".
-
Hi,so it looks that tuner is found.
AlexELEC:~ # dmesg | grep DVB
[ 15.985347@1] DVB: aml_dvb_probe: probe amlogic dvb driver
[ 15.985375@1] DVB: aml_dvb_probe: dmx rst ctl = ffffffc0238b46c0
[ 15.985383@1] DVB: aml_dvb_probe: asyncfifo rst ctl = ffffffc0238b4480
[ 15.985389@1] DVB: aml_dvb_probe: ahbarb0 rst ctl = ffffffc0238b4ac0
[ 15.985397@1] DVB: aml_dvb_probe: uparsertop rst ctl = ffffffc0238b4f00
[ 15.985471@1] DVB: registering new adapter (amlogic-dvb)
[ 15.985475@1] DVB: aml_dvb_probe: Registered adpter: amlogic-dvb
[ 15.995042@0] DVB FE: Init AVL6862/M88RS6060 frontend 0
[ 17.220192@0] i2c i2c-2: Load avl6862 firmware patch for DVB-T/T2 size=70044
[ 17.809533@0] DVB FE: AVL6762 and MxL608 attached!
[ 17.809544@0] amlogic-dvb dvb.50: DVB: registering adapter 0 frontend 0 (Availink avl6762)...
[ 17.809882@0] DVB FE: Frontend AVL6862/M88RS6060 registred!
Now my problem is, that it cannot find any dvb-t2 programs. Tvheadend shows at scanning some signal jumping (even over 90%) but than drops to 30% and skip to next channel search.I tried all drivers which I can select in Kodi, and even CoreElec. At coreelec (gxl_p231_1g_m8s_dvb.dtb withou dvbt because there is none) tvheadend 4.2 and at alexelec (gxl_p231_1g_m8s_dvbt.dtb) the one from linuxserver.io 4.3. Overall is the same behaviour.I am using this versions, alexElec 3.3.9 and coreElec 9.2.8.I tried some newer versions, but it hangs cycled at some SIP searching...? Why is not possible to use newer versions?Do you have any idea how to get scanned channels?Thanksstandal
PS: Now I looked also on the tuner chips and they are AVL6762 and MXL608. which does not corespond with "DVB FE: Frontend AVL6862/M88RS6060 registred!". Any idea?
-
Hi,so it looks that tuner is found.
Hi,
Sorry, I can't help you with anything. I've never had such a box.
-
It is all right. Anyway thanks for trying, minimal I have learned something.Thanks standal
-
Приветствую. Можете пожалуйста подсказать какой файл мне нужно скачать для установки на Tronsmart Vega S96 (S912, 2/16, LAN по описанию гигабитный, но на слимбоксе работает в 100 мбит). Хочу установить на usb-флешку и загружаться с неё. Заранее спасибо
-
Приветствую. Можете пожалуйста подсказать какой файл мне нужно скачать для установки на Tronsmart Vega S96 (S912, 2/16, LAN по описанию гигабитный, но на слимбоксе работает в 100 мбит). Хочу установить на usb-флешку и загружаться с неё. Заранее спасибо
Здравствуйте.
https://github.com/AlexELEC/AE-AML/releases/download/3.3.9/AlexELEC-S9XX.arm-3.3.9.img.gz (https://github.com/AlexELEC/AE-AML/releases/download/3.3.9/AlexELEC-S9XX.arm-3.3.9.img.gz)
Дерево устройств - gxm_q200 или gxm_q201. Подбирайте свое.
-
Приветствую. Можете пожалуйста подсказать какой файл мне нужно скачать для установки на Tronsmart Vega S96 (S912, 2/16, LAN по описанию гигабитный, но на слимбоксе работает в 100 мбит). Хочу установить на usb-флешку и загружаться с неё. Заранее спасибо
Здравствуйте.
https://github.com/AlexELEC/AE-AML/releases/download/3.3.9/AlexELEC-S9XX.arm-3.3.9.img.gz (https://github.com/AlexELEC/AE-AML/releases/download/3.3.9/AlexELEC-S9XX.arm-3.3.9.img.gz)
Дерево устройств - gxm_q200 или gxm_q201. Подбирайте свое.
Спасибо большое за подсказку. Правильно ли я понимаю что torrserver не обновить сейчас до последней версии из-за устаревшего железа?
-
Правильно ли я понимаю что torrserver не обновить сейчас до последней версии из-за устаревшего железа?
Не могу сказать. Давно не пользуюсь этой системой.
-
Правильно ли я понимаю что torrserver не обновить сейчас до последней версии из-за устаревшего железа?
Система 3.3.9, Torrserver MatriX.130 (остання версія)
-
Здравствуйте!
Имеется приставка K1 Plus и я так подозреваю что моя версия на 905D,
так как раньше на схожие боксы ставил прошивки от Виталия и на этом боксе она не запускается.
Раньше к сожалению ничего не слышал о вашей прошивке и что она существует на данный процессор.
Очень хочу попробовать установить последнюю версию AlexELEC-3.3.9 (Amlogic 905/912).
Несколько вопросов.
Подскажите за работает ли данной прошивке шара нтв dvb-s2?
Например по протоколу wicardd либо какому-то другому?
И не подскажите каким лучше всего софтом в андройде посмотреть точную модель процессора и остальных параметров приставки
чтобы отредактировать nEnv.ini и добавить дерево устройств в корень SD-карты?
Заранее Вам большое спасибо!
-
Здравствуйте.
Подскажите за работает ли данной прошивке шара нтв dvb-s2?
Например по протоколу wicardd либо какому-то другому?
Да, будет работать. Вы можете использовать встроенный в Tvheadend newcamd-клиент или настроить шаринг в Oscam (есть в системе).
И не подскажите каким лучше всего софтом в андройде посмотреть точную модель процессора и остальных параметров приставки
чтобы отредактировать nEnv.ini и добавить дерево устройств в корень SD-карты?
Софт не скажу, я не пользуюсь Андроид. Вы можете попробовать с деревом "gxbb_p200_k1_plus" (К1-Plus S905), если не загрузиться пробуйте другие, например gxl_p230_k1_pro (K1-Pro S905D).
-
Спасибо огромное! Буду пробовать, отпишусь!
-
Здравствуйте! Еще раз Вам огромное спасибо за прошивку!!!
Все установил. Во всем разобрался! Работает отлично!