[Alex]

Системы для линейки процессоров Amlogic NG и Amlogic NE.

Система собрана на базе «CoreELEC 20.1-Nexus» с обновлениями по 07.04.2023.

Основное ПО:

• Kodi 20.1 Final
• ядро Linux 4.9.269 (NG) / 5.4.125 (NE)
• TVLINK 3.2.8

Отличия от оригинала описаны здесь.

[shippy]

General question about USB/SD card label in ARM AE CE distros.

1. On the AE x86 11.1.x distros, I am able to customize the distro and also relabel the USB/ SD card from COREELEC to say, TV1113; and then boot as usual.

2. But on the ARM CE -AE distros, changing the USB stick/ SD card from COREELEC to custom doesn't allow proper boot !

After the vendor screen splash I see an error like : error.... LABEL= COREELEC....

Changing to the custom label, say, LABEL= TVCEAE02 in cfgload file results in no boot and a blank screen with no error message.

So I have to go back to the USB /SD card  label as COREELEC.

3. Is there an easy way to relabel the USB/SD card with ARM distro, and still boot properly ?

[Alex]

3. Is there an easy way to relabel the USB/SD card with ARM distro, and still boot properly ?

Hi.
No. There is no easy way. The file (cfgload) cannot be edited. This is not a text file.

[shippy]

I was looking at the CE-AE03 NG & NE distro SoC support list. I did not find S905 (gxbb_p200-) supported.

Is this correct?


Which one is the latest distro to support S905 SoC?

[Alex]

Is this correct?

Yes.

Which one is the latest distro to support S905 SoC?

https://forum.alexelec.tv/index.php?topic=256.msg3521#msg3521

[shippy]

So actually I did try the AE arm 3.3.5 S9xx Dual distro, again after earlier attempts in January and April when things were working ok. Device in all cases is x96mini (S905W) with 2/16GB.


(Later I tried the CE-AE 02/03 Ng versions and wifi didn't work, streaming was slow and freezing happened.)

 AE3.3.6 installs fine on x96mini (S905W) with 2/16 GB, TVlink installs and updates to 3.2.8, other settings, e.g. WiFi and SSH password update also works. Dtb uenv default was p281_2g, so no change was needed here.


Tried IR update in AE Settings and my original x96mini remote started working fine ( started the distro with a USB remote.)

But the previous AE3.3.5 backups I made via AE Settings don't seem to restore, even after several boots ! I just get back the original distro...tried two different backups.

Also checked the .tar backups- they all show the correct addons and settings that should be restored.

The .tar backup file shows under /storage/.restore. I changed the permissions from 0644 to 0755 but no effect !

A. What can I do here ? 🤔
B. Also what is the purpose of AE Settings> System> IR remote update? Does it auto discover the device remote ?

[Alex]

A. What can I do here ? 🤔

Can not say. Need a system log with the problem.

B. Also what is the purpose of AE Settings> System> IR remote update? Does it auto discover the device remote ?

I haven't used this system for a long time. I just don't remember.

[vlad1973_1]

Здравствуйте Alex. А в этой ветке вы добавляли драйвер Wi-Fi модуля — «SCI s9082c» который был в Вашей alexelec 3 ветке?

[Alex]

Здравствуйте Alex. А в этой ветке вы добавляли драйвер Wi-Fi модуля — «SCI s9082c» который был в Вашей alexelec 3 ветке?

Здравствуйте. Лично я ни каких драйверов не добавлял. Все аналогично оригинальному CoreELEC.

[vlad1973_1]

Проверил, wifi и сетевая не работают(. А из alexeleca при последующих обновлениях будет возможность добавить драйвер в coreelec?

[Alex]

А из alexeleca при последующих обновлениях будет возможность добавить драйвер в coreelec?

Нет. Разные ядра.